Description
Forklift Standard Rear Vision Mirror
The Standard Rear Vision Model is available in two sizes and comes complete with a tough stainless Steel back, impact resistant face and easily adjustable bracketing system.
Features
- 2mm acrylic mirror face
- Pure reflective coating
- Pressed Stainless Steel back
- Vinyl extrusion
- Includes angle mounting plate to fix to cab upright support.
Suitable Uses
- Forklift Rear Vision
- Other vehicle Rear Vision
Download Information Sheet pdf.
Positioning
*Note: Bracket Change to 19520 (200mm) model.
Specifications
Product Code | Size Diameter | View Distance | Mirror Face | Mirror Back | Bracket Length |
---|---|---|---|---|---|
19515 | 150mm | Up to 3m | 2mm Acrylic | Stainless Steel | 54x32mm Angle |
19520 | 200mm | Up to 4m | 2mm Acrylic | ACM | 100mm J-Bracket |
Cleaning Guide
Acrylic Mirror Cleaning Guide:
General Cleaning:
DuraVisionTM recommend cleanning their acrylic mirror faces with soap and water and then with a clean, soft, lint free, damp cloth. Use a non-abrasive polish, such as Johnson’s Pledge or Mr Sheen for a clear bright reflection.
Saturate a clean soft cloth with polish, then spray the mirror face with polish. Wipe the wetted cloth over the mirror surface. With a another clean dry cloth buff the mirror face until it is clear of polish.
DO NOT USE:
- abrasives
- acids
- solvents such as petrol and laquer thinners
Graffiti Removal:
Any graffiti should be removed from the mirror face as soon as possible and preferably within 24 hours. To remove graffiti, use a non-abrasive substance such as De-Solv-it Stain Remover. Not all graffiti cleaning agents are suitable. Failure to use an approved cleaning agent may damage the mirror surface.
Scratches:
To remove scratches or repair blemishes on acrylic mirror faces only, use the following products:
- For cleaning use NOVUS plastic polish #1
- For fine scratches use NOVUS plastic polish #2
- For badly scratched surfaces use NOVIS plastic polish #3 followed by #2 and #1.